Stainless steel material, fully meet the requirements of food and drug
Mixing motor is maintenance-free, noiseless gear reduction motor
The blanking motor adopts high speed and low noise three-phase stepping motor
(Taiwan dongyuan or panasonic of Japan or schneider servo motor of France can be selected as required)
For different materials, different mixing structure can be used to avoid leakage of some special materials
Fool type of operating software, everyone can use
Transparent bin, material operation status at a glance
Openable feed bin: it can be cleaned and maintained without removing the bin
|packaging speed||1200-3500 bags/hour|
|Voltage||AC380V （or 220V）|
1. Can be cleaned at any time, at will, without dead Angle, within 10 minutes
2. It is convenient to adjust the position of the agitator to achieve the best packing precision
3. The agitator, measuring screw, long shaft and other components can be easily maintained
High precision processing means make motor, long shaft, bin, measuring screw, cup and so on to achieve a high degree of concentric.
1. Improve operation efficiency
2. Reduce the wear of measuring screw
3. It greatly reduces the malfunction of metering screw caused by moving, cleaning and stirring operation after a long period of operation
The measuring cup and bin are linked by quick loading clamp, which is easier to use.
1. Quantitative method is generally adopted in the following situations:
Material with good fluidity and uniform specific gravity, such as glucose, flour, starch, small crystals and small particles. Small bags, small bottles.
Packaging precision requirements are not very strict, weighing method is acceptable.
2. The weighing method may be considered in the following situations:
Material with poor fluidity, large change in specific gravity and large moisture content, such as sugar, oil tea, water-soluble fertilizer, manganesin, etc. A large size bag, a large diameter bottle.
Packaging precision requirements are relatively high.